| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-219-14-11
5-140. COMPRESSOR - HVAC - MAINTENANCE INSTRUCTIONS (Continued)
LOCATION
ITEM
ACTION
REMARKS
OVERHAUL - (Cont)
10. Connecting
a. Cylinder
Remove.
Refer to step 6.
Rods,
head
Connecting
Rod
b. Valve
Remove.
Refer to step 7.
Bearing
plate
Inserts,
Piston
c. Bottom
Remove.
Refer to step 9.
and
plate
Piston
nuts
Pins
(47)
d. Connect-
Remove.
ing rod
caps (48)
NOTE
Label caps and rods so that caps can be put back on their respective rods and
each rod reinstalled in same place on crankshaft.
e. Cylinder
Remove as an assembly.
sleeve
(40),
connect-
ing rod
(49),
and
piston
(50)
Take care that piston does not come through top of sleeve. Connecting
rod will not pass through sleeve and it is difficult to get rings back into
cylinder without breaking them or damaging suction valve seats.
f. Connect-
Remove.
rod bolts
(51)
5-1432
|
||
|
||
