| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-219-14-11
6-6. ELASTOMERIC COMPENSATING WINCH - MAINTENENCE INSTRUCTIONS (Continued)
LOCATION
ITEM
ACTION
REMARKS
REASSEMBLY (Con')
t
m. Screws (9)
1. Tighten the screws (9)
opposite each other
until the bearing face
has seated on the
mounting surface.
2. Torque the screws to
30 ft-lbs.
n. Bushing (7)
Install the bushing (7)
over the output shaft of
gear box, chamfer end
first.
o. Set screws
Install and tighten set
(10) screws (10) to 24 ft-lbs
after the bushing has
seated inside the outer
mounting plate.
NOTE
Refer to paragraphs 5-48, 5-49, 5-50 to reassemble
winch drum to the speed reducer and place bow ramp
winch back into operation.
Change 1
6-37/(6-38 blank)
|
||
|
||
