| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-219-14-2
2-100. EMPTYING HOLDING TANK.
The oil/water separator is used to empty the used oil holding tank. Refer to Figure FO-53 and proceed as follows:
a.
Aft Engine Room.
Check sight glass (1) on holding tank.
NOTE
Holding tank will hold 25 gallons (94.6 liters).
b.
On Deck (Port Side).
(1)
Open on-deck discharge valve (2).
(2)
Place a suitable container under valve.
c.
Aft Engine Room.
(1)
Close Inlet valve (3).
(2)
Check that valves (4, 5, 6, 7 and 8) are closed.
(3)
Open suction valve (9).
(4)
Place manual shutoff valve (10) in the OFF position.
(5)
Place manual shutoff valve (11) in the ON position.
2-446'
|
||
|
||
