| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-219-14-2
OPERATING INSTRUCTIONS
HALON FIRE DETECTION AND SUPPRESSION SYSTEM
NOTE: Read Technical Manual before operating.
Operating Procedures
1.
Put audible alarm switch in the "ON" position.
2.
When fire is detected, a light on the control panel will illuminate and a horn will sound.
3.
If auto operation is not desired, the agent can be released manually by removing locking pin on pneumatic
control valve on halon cylinder and activating manual release lever.
4.
In case of electrical failure or if visual detection of a fire is noted before the detectors sense it, a mechanical-
manual release is provided. For the flammable liquid store room, it is located. Aft of flammable liquid store
room door.
5.
When the extinguishing agent is released, the Pressure Accumulator will be activated to shut down ventilation
blowers, activate amber lights and alarm.
6.
After the fire has been extinguished, the pressure switch in the compartment must be manually reset to start
vent fans.
7.
To put the system back into operation after a fire, see the Tech Manual.
8.
For test procedures, see the Tech Manual.
Change 2
2-665
|
||
|
||
