| Tweet |
Custom Search
|
|
|
||
 TM 11-1905-219-14-3
Table 3-62. Anchor Winch Engine No Fuel or Insufficient
Fuel Troubleshooting (Cont.)
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
4. Faulty installation (Cont.)
Step 2.
Check for inoperative fuel return line check lift valve.
Make sure that the check valve is installed in the line correctly; the arrow
should be on top of the valve assembly or pointing upward. If the valve is
inoperative, replace it with a new valve assembly. Refer to paragraph 3-
147.
Step 3.
Check for high fuel return temperature.
Check the engine fuel spill-back temperature. The return fuel temperature
must be less than 150 (65.5 ) or a loss in horsepower will occur. This
F
C
condition may be corrected by installing larger fuel lines or using the fuel oil
heat exchanger.
3-197
|
||
|
||
