Table 3-76. Anchor Winch Engine - Hydrostarter Fluid Emerges From the Reservoir Filler Cap When Starter is Used

Custom Search

Table 3-75. Anchor Winch Engine - Hydrostarter Hight Pressure in System (3500 psi or above) - Troubleshooting.

TM-55-1905-219-14-3 Landing Craft Utility (LCU) 1667 Class Boston Hull Numbers 1667-1670 NSN 1905-00-168-5764 Manual

figure

TM 11-1905-219-14-3

Table 3-76. Anchor Winch Engine - Hydrostarter Fluid Emerges From

the Reservoir Filler Cap When Starter is Used -

Troubleshooting.

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION

1. Fluid emerges from the reservoir filler cap when starter is used.

Step 1.

Check for filter element in filler cap being loaded with dirt.

Rinse the filter cap thoroughly in fuel oil and dry with compressed air.

Step 2.

Check for nitrogen in fluid returned to reservoir.

Overhaul the accumulator.

Step 3.

Check for excess fluid in reservoir.

Check the fluid level after the accumulator is charged and the engine-driven

pump is by-passing a full stream of oil to the reservoir. The fluid level must

be sufficient to completely cover the screen in the bottom of the tank.

3-221