| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-219-14-4
3-14.2. FUEL STRAINER - MAINTENANCE INSTRUCTIONS.
A fuel strainer (primary) is used to remove impurities from the fuel. It is located between the fuel supply
tank and the fuel pump, and operates under suction. It consists of two strainer elements. Either element is
selected by a lever located on the front. The selector allows a strainer to be removed and cleaned while the
engine is in operation.
This task covers:
b. Cleaning and Inspection
a. Removal
c. Repair
d. Installation
INITIAL SETUP
Test Equipment
References
NONE
NONE
Special Tools
Equipment
Condition
Condition Description
NONE
NONE
Material/Parts
Special Environmental Conditions
NONE
Do not drain fuel into bilges.
Personnel Required
General Safety Instructions
1
WARNING
Use eye protection when using compressed air
LOCATION
ITEM
ACTION
REMARKS
Removal
1. Pipe
a. Container
a. Place under plug (1).
Allow fuel
plug
to drain
and
into con-
gas-
b. Remove plug (1) and
tainer.
ket
gasket (2).
c. Replace plug and gasket
when fuel has drained out.
3-522
|
||
|
||
