| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-219-14-4
3-28.
EXHAUST MANIFOLD-MAINTENANCE INSTRUCTIONS (Cont).
LOCATION
ITEM
ACTION
REMARKS
INSTALLATION
4. Exhaust
NOTE
manifold
(Right or
All traces of the old gaskets must be
left)
removed from the exhaust manifold and
cylinder head.
a. Studs
Replace.
If necessary.
(22)
b. Gaskets
Place on studs in cylin-
Use new gasket.
(20 and
der head.
21)
c. Exhaust
Place on studs, up
manifold
against gaskets.
(14)
d. Bevel
Install.
Draw manifold
washers
up to gaskets.
(19) and
nuts (18)
NOTE
Bevel washers should be set in position so that the
outer diameter will rest on the manifold and the
crown at the center is next to the nut.
e. Grabs
Install.
(17)
and
nuts
(16)
f. Nuts
Tighten.
Torque to 30-35
(16 and
lb-ft (40.7-
18)
47.5 Nm).
NOTE
The exhaust manifold stud nuts should be tightened
from the center of the exhaust manifold outward,
alternating towards either end.
3-666
|
||
|
||
