| Tweet |
Custom Search
|
|
|
||
 TM 55-1905--219-14-4
3-33.2. EXHAUST VALVE - MAINTENANCE INSTRUCTIONS (Cont).
LOCATION
ITEM
ACTION
REMARKS
INSPECTION (Cont)
15. Exhaust
Remove and discard the valve guide
valve
oil seals if used. Clean the in-
guides
side diameter of the valve guides
(11)
with a brush. This brush will re-
move all gum or carbon deposits
from the guides, including the
spiral grooves. Inspect the valve
guides for fractures, chipping,
scoring, or excessive wear. Check
the valve-to-guide clearance, since
worn valve guides may eventually
result in improper valve seat contact.
If the clearance exceeds .005 inch
(0.0127 cm), replace the valve guides.
16. Exhaust
Inspect the valve seat inserts for
valve
excessive wear, pitting, cracking
seat
or an improper seat angle. The
insert
proper angle for the seating face
(12)
of both the valve and insert is 30
.
When a valve seat insert has been
ground to such an extent that the
30angle will contact the cylin-
der head, install a new insert.
3-737
|
||
|
||
