| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-219-14-4
3-34. CYLINDER HEAD - MAINTENANCE INSTRUCTIONS (Cont).
LOCATION
ITEM
ACTION
REMARKS
ASSEMBLY (Cont)
NOTE (Cont)
attaching a 1/8" (.3175 cm) diameter brass rod to a brush. After cleaning, dry the
cylinder head with compressed air.
Use eye protection when using compressed air.
Apply a small amount of "dual purpose" sealer to the threads of the plugs only.
Work the sealant into the threads and wipe the excess with a clean lintless
cloth so that sealant will not be washed into the fuel and oil passages.
NOTE
Apply sealant to threads of pipe plugs 14, 20 and 21.
24. Cylinder
a
Pipe
Install seven plugs.
Tighten to (18-
head
plugs
22 lb-ft),
(21)
(24.4-29.8 Nm).
b. Pipe
Install seven plugs.
Tighten to (14-
plugs
16 lb-ft),
(20)
(18.9-21.7 Nm).
c.
Pipe
Install four plugs.
Tighten to
plugs
flush or 1/8
(18)
inch recessed.
d. Pipe
Install thirteen plugs.
Tighten to (14-
plugs
16 lb-ft),
(14)
18.9-21.7 Nm).
3-762
|
||
|
||
