| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-219-14-4
3-40.4.
CYLINDER LINER - MAINTENANCE INSTRUCTIONS (Cont).
LOCATION
ITEM
ACTION
REMARKS
INSPECTION (Cont)
6.
Inspect the block bore
If the clear-
and check the liner-
ance exceeds
to-block clearance
zero to .002
whenever a liner is
inch (0.0051
removed.
cm), it will
be necessary
to bore the
block for an
oversize liner.
Refer to Direct
Support Mainte-
nance.
NOTES
Cylinder liners are
available in .001,
.005, .010, .020 and
.030 inch oversize on
the outside diameter.
When an oversize liner
is used, the amount
of oversize is stamped
on top of the cylinder
block adjacent to the
liner counterbore.
New service liners,
standard and oversize,
have an inside diameter
of 4.2495 to 4.2511
inch (10.7937 to
10.7978 cm).
3-873
|
||
|
||
