| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-219-14-4
3-48.
HYDROSTARTER PUMP (ENGINE-DRIVEN) - MAINTENANCE INSTRUCTIONS.
(Cont).
LOCATION
ITEM
ACTION
REMARKS
REMOVAL (Cont)
10.
Charging
a.
Remove five capscrews
pump
(7) and lockwashers (8).
b.
Remove charging pump
(9) from flywheel
housing.
c.
Remove gasket (10).
INSTALLATION
11. Engine
Charging
a.
Install gasket (10)
Use a new
driven
pump
and charging pump
gasket. Use
pump
(9).
Permatex #2
sealant on
b.
Align the tangs on
the flywheel
the pump drive with
side only.
the slots in the
drive plate.
CAUTION
Do not force the pump into place. Use of force, or tightening the
bolts when the mounting flange is not against the flywheel
housing, will force the drive arm against the pump body and
result in damage to the pump when the engine is started.
3-938
|
||
|
||
