| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-219-14-5
3-69. FUEL PUMP - MAINTENANCE INSTRUCTIONS (Cont).
LOCATION
ITEM
ACTION
REMARKS
ASSEMBLY AND INSTALLATION
25.
Driven
Place assembly in
Make certain
shaft
pump body, having
that gear is
and
chamfered end of
centered on
gear
gear teeth facing
shaft.
assem-
pump body. If a
bly
replacement assembly
(10)
with a slot is used,
then the slot must
face the pump cover.
26.
Lubricate, using
and
clean engine oil.
shafts
27. Pump
Sealant
Apply an especially
Sealant must
cover
thin coat of quality
be very thin.
face,
sealant to face of
Do not squeeze
not
pump cover.
sealant into
near
gear compart-
gear
ment.
area
28. Pump
Pump
Place cover against
Cover can be
body
covers
pump body, making
installed in
sure two dowel pins
only one pos-
in pump cover are
ition.
located in holes in
pump body.
29.
Pump
Install bolts and lock-
Eight bolts
covers
washers. Tighten al-
and lock-
ternately and evenly.
washers.
30.
Pump
Rotate shaft by hand
If shaft sticks,
shaft
to insure that all
tap corner of
parts rotate freely.
pump and try
again.
31. Drain
Pipe
Install.
holes
plugs
NOTE
Pump must always be installed with inlet opening in pump cover marked "L.H.IN"
next to balance weight cover.
3-1262
|
||
|
||
