| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-219-14-5
3-89.1. CYLINDER HEAD-MAINTENANCE INSTRUCTIONS (Cont)
LOCATION
ITEM
ACTION
REMARKS
INSPECTION AND REPAIR (Cont)
17. Exhaust
Inspect.
Refer to para-
valve
valve
areas
seat
inserts
and
valve
guides
REPAIR
18. Cam fol-
Cam fol-
Inspect for scoring
Light score
lower
lower
or wear.
marks may be
bores
cleaned up with
crocus cloth
wet with fuel
oil. Measure
the bore dia-
meter. The cam
follower-to-
cylinder head
clearance must
not exceed .006
inch (.015 cm)
with used parts
(refer to spec-
ifications).
If the bores
are excessively
scored or worn,
replace the
cylinder head.
19. Water
Water
Check that they are
Replace, if
holes
hole
not loose.
necessary, as
nozzles
follows:
(single
outlet)
a. Remove the
(26),
old nozzles.
and
(double
b. Make sure the
outlet)
water inlet
(27)
ports in the
cylinder head
are clean and
free of scale.
3-1480
|
||
|
||
