| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-219-14-5
3-90.1. VALVE AND INJECTOR OPERATING MECHANISM - MAINTENANCE INSTRUCTIONS (Cont).
LOCATION
ITEM
ACTION
REMARKS
REPAIR (Cont)
NOTE
If new cam follower assemblies are to be installed, remove the preservative by
washing with Cindol 1705 and wipe dry. Do not use fuel oil.
Before cam followers are installed, immerse them in clean Cindol 1705 (heated
to 100-125 or 38-52 ) for at least one hour to ensure initial lubrication of the
F
C
cam roller pins and bushings. Rotate the cam rollers during the soaking period
to purge any air from the bushing-roller area. The heated Cindol oil results in
better penetration as it is less viscous than engine oil and flows more easily
between the cam roller bushing and pin. After the cam followers are removed
from the heated Cindol 1705, the cooling action of any air trapped in the
bushing and pin area will tend to pull the lubricant into the cavity.
Heat the Cindol 1705 in a small pail with a screen insert. The screen will
prevent the cam followers from touching the bottom of the pail and avoid the
possibility of contamination.
9. Rocker
a. Rocker
Press out of rocker arm.
arm as-
arm
sembly
large
(7)
bushing
(16)
b. Clevis
Press out of rocker arm.
pin (17)
c. Clevis
Remove.
(18)
d. Rocker
Press out of rocker arm.
arm small
bushing
(19)
3-1524
|
||
|
||
