| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-219-14-5
3-91.5. CAMSHAFT AND BALANCE SHAFT - MAINTENANCE INSTRUCTIONS (Cont).
LOCATION
ITEM
ACTION
REMARKS
INSTALLATION
4. Camshaft
a. Camshaft
Push into cylinder block.
Tap shaft into
or balance
(17) or
Align key with keyway in
gear with a
shaft
balance
gear.
soft hammer.
shaft
(18) and
woodruff
keys (19)
b. Camshaft
Remove.
gear
puller,
spacers
and adap-
ter plate
c. Retaining Install finger tight.
nuts (4)
d. Thrust
1. Apply grease to the
washers
steel face of each
(15)
washer
2. Place thrust washer
The steel face
against the inner
of the thrust-
end of the shaft
washer must be
front end bearing
against the
bearing.
e. Front
Install and secure to
Tighten screws
end
front end plate (14).
to 35-40 lb-ft
(52.1 - 59.5
(13),
kg/m).
screws
(11) and
lock-
washers
(12)
f. Thrust
Install and secure to
Tighten screws
washers
front end plate (14).
to 35-40 lb-ft
(8)
(52.1 - 59.5
kg/m).
3-1598
|
||
|
||
