| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-219-14-5
3-96.2. CONNECTING ROD - MAINTENANCE INSTRUCTIONS (Cont).
LOCATION
ITEM
ACTION
REMARKS
DISASSEMBLY
7. Bushings
a. Connec-
1. Clamp under end of rod
Use tool J7632.
ting
in holder, so that
rod (3)
bore in the bushings
is aligned with the
hole in the base of
the holder.
2. Place bushing remover
Use tool
in the connecting rod
J1513-2.
bushing.
3. Insert handle in the
Use tool
remover and drive the
J1513-3.
bushings (9) from the
rod (3).
8. Spray
a. Connec-
Remove.
Refer to step 7.
Nozzle
ting rod
(8)
bushings
(9)
b. Spray
1. Insert spray nozzle
Use tool J8995.
Nozzle
remover through the
(8)
upper end of the con-
necting rod and insert
the pin, in the curved
side of the tool, in
the opening in the
bottom of the spray
nozzle.
2. Support the connecting
rod and tool in an
arbor press.
3. Place a short sleeve
directly over the
spray nozzle. Then
press the nozzle out
of the connecting rod.
4. Remove the tool.
3-1670
|
||
|
||
