| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-219-14-5
3-101. HYDROSTARTER - MAINTENANCE INSTRUCTIONS (Cont).
LOCATION
ITEM
ACTION
REMARKS
REPAIR
9. Hydro-
Control
a. Remove capscrews (7)
starter
valve
and lockwashers (8).
b. Remove control valve
(9).
c. Remove control valve
Discard seal
pin (10) and seal
rings.
rings (11).
d. Remove plug (12).
e. Remove preformed pack-
Discard if dam-
ing (13) and gasket
aged.
(14).
10.
Housing
a. Replace pipe plug
If necessary.
(15).
b. Replace pipe plug (16)
If necessary.
and oil wick (17).
Dip wick in
engine oil.
INSTALLATION
11.
Control
a. Install plug (12).
valve
b. Install new seal rings
Install seal
(11).
rings in seal
ring grooves in
valve body.
c. Install gasket (14).
Use new gasket.
d. Lubricate control
Lubricate with
valve start control
Engine oil.
valve pin (10).
e. Start control valve
pin (10) slotted end
out, straight in con-
trol valve, and push
it through the seal
rings (11).
3-1772
|
||
|
||
