| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-219-14-5
3-108. 24 VDC RECTIFIER - MAINTENANCE INSTRUCTIONS (Cont).
LOCATION
ITEM
ACTION
REMARKS
REPAIR (Cont)
b. Input
1. Loosen screws (1) on
Door will swing
fuse
front panel (2).
open on hinge.
2. Unsnap fuse (6) from
Check fuse with
retaining spring-clip.
ohmmeter, dis-
card if defec-
tive.
3. Install new fuse (6)
into retaining spring-
clip (7).
4. Close front panel door
(2) and tighten screws
(1).
WARNING
Make sure all sources of power are shut off. Tag and disconnect all incoming AC
wiring, and outgoing DC wiring. Failure to do so may result in severe injury to
personnel, and damage to landing craft.
c. Terminal
1. Loosen screws (1) on
Door will swing
board
front panel (2).
open on hinge.
2. Tag and disconnect
Refer to sche-
wiring from terminal
matic.
board (8).
3. Remove hardware
Discard.
attaching terminal
board (8) to chassis.
4. Install new terminal
board (8).
5. Attach wiring to ter-
Refer to sche-
minal board (8). Re-
matic.
move all tags from
wiring.
3-1824
|
||
|
||
