| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-219-14-6
3-117. WINCH ASSEMBLY - MAINTENANCE INSTRUCTIONS (Continued).
LOCATION
ITEM
ACTION
REMARKS
REASSEMBLY (Cont)
NOTE
Hand brake must be disengaged to complete disassembly or reassembly.
9.
Bearing
a. Cable
1. Slide cable drum (17)
Place a wood
housing
drum
down speed reducer
support block
(8)
key
shaft (9) far enough
under cable
to install cable drum
drum.
key (18).
2. Slide cable drum (17)
Remove wood
back into place.
support block.
b.
Bearing
1. Install oil seal bear-
housing
ing (16), and seal
plate holder (15) onto
speed reducer shaft
(9).
2. Install bearing
housing (8) onto speed
reducer shaft (9).
3. Install lockwashers
(14), capscrews (13)
onto seal plate
holder (15) and
bearing housing (8).
4. Install dowel pins
(12), lockwashers
(11), and capscrews
(10) onto bearing
housing (8).
c.
Bearing
1. Install bearing
roller
adapter (7) onto
bearing roller (6).
2. Install bearing roller
(6) and bearing adapter
(7) onto speed reducer
shaft (9) and into
bearing housing (8).
3-2012
|
||
|
||
