| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-219-14-6
3-139.1. HYDRAULIC PUMP - MAINTENANCE INSTRUCTIONS (Continued).
LOCATION
ITEM
ACTION
REMARKS
REASSEMBLY (Cont)
e. Roller
Insert.
Use an arbor
bearing
press.
(35)
f.
Thrust
1. Store the face
plate
which will be
(31)
closest to the gears.
2. Air blow or wipe clean.
3. Place a small amount
of grease into the
middle slot in the
thrust plate.
g. Pocket
Place a 29/64 inch
Use pocket seal
seal
(1.1509 cm) long pocket
K3026-4. Be
(34)
seal into the middle
sure the seal
slot.
is cut straight
across and the
seal is the
same length as
the slot.
h. Thrust
Assemble.
1. Tap together
plate
with inserted
(31),
pocket shield
and
(34) over the
shaft
bearing races
end
in the shaft
cover
end cover.
(16)
Use a soft
hammer.
2. Be sure a
small clearance
1/32 inch
(0.079 cm) is
left between
the thrust
plate and the
face of the
shaft end cover.
3-2332
|
||
|
||
