| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-219-14-6
3-144. BLOWER - MAINTENANCE INSTRUCTIONS (Continued).
LOCATION
ITEM
ACTION
REMARKS
INSPECTION (Cont)
b. Housing
1. Inspect for oil leaks.
2. Inspect for breaks,
dents, cracks or
damage.
3. Inspect for loose
mounting hardware.
2. Blower
a. Oil
Inspect for leaks,
drive
fill
breaks and damage.
support
pipe
b. Housing
1. Inspect for breaks,
cracks and damage.
2. Inspect for leaking
oil.
3. Inspect for tight
hardware.
c. Hoses
Inspect for wear,
breaks, or defects.
d. Tubing
Inspect for breaks,
bends, or damage.
3. Blower
(engine
running)
NOTE
The air intake (paragraph 3-143)
must be removed to perform the
following inspections.
When inspecting a blower on an engine with the
engine running, keep fingers and clothing away
from the moving parts of the blower and run the
engine at low speeds only.
3-2471
|
||
|
||
