| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-219-14-6
3-144. BLOWER - MAINTENANCE INSTRUCTIONS (Continued).
LOCATION
ITEM
ACTION
REMARKS
INSTALLATION
NOTE
The fuel pump and fresh water pump can be installed
onto the blower prior to reassembly.
8. Blower
NOTE
Before attaching the blower to the engine, check
the inside of the blower for any foreign material
and revolve the rotors by hand to be sure they
turn freely.
a. Gasket
Affix to engine block.
Use a new gas-
(16)
ket. Affix
with Scotch
Grip Rubber
Adhesive #4300
or equivalent.
b. Blower
Place on drive shaft
Use a new seal
drive
cover (14).
and clamp.
seal
(15),
and
packing
clamp
(9)
c. Fresh
Install on blower.
Refer to para-
water
pump
d. Fuel
Install on blower.
Refer to para-
pump
e. Blower
Place into position
Do not move
(13)
against cylinder block.
blower gasket.
f. Screws
Install.
Torque to 55-
(11),
60 lb. ft. (74.
and
58- 81.36 Nm)
flat-
washers
(12)
3-2480
|
||
|
||
