| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-219-14-6
3-145. FUEL PUMP - MAINTENANCE INSTRUCTIONS (Continued).
LOCATION
ITEM
ACTION
REMARKS
REASSEMBLY (Cont)
16.
Drive
a. Drive
1. Install drive gear
Do not use the
shaft
gear
(12) over end of
squared end.
assembly
(12)
drive shaft (10).
(9)
2. Make sure the slot in
the drive gear (12)
will face the plain
end of the drive
shaft (10).
NOTE
This operation is very important; otherwise fine
score marks caused by pressing the gear into
position from the square end of the shaft, may
cause rapid wear of the oil seals.
3. Press the drive gear
(12) beyond the retain-
ing locking steel ball
(11) detent.
4. Install locking steel
ball (11) into detent.
5. Press drive gear (12)
back until the drive
gear (12) slot contacts
the locking steel ball
(11).
3-2499
|
||
|
||
