| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-219-14-6
3-148.1. LUBE OIL FILTER (FULL FLOW) - MAINTENANCE INSTRUCTIONS
(Continued).
LOCATION
ITEM
ACTION
REMARKS
SERVICE (Cont.)
c. Filter
Remove from shell (3).
Discard and dis-
element
pose of proper-
(6)
ly.
Wear protective eye goggles when using compressed air.
d. Shell
Clean.
Use clean fuel
(3)
oil and dry
with compressed
air.
e. Filter
Carefully position
element
filter element (6)
over center stud (2)
and within shell (3).
f.
Oil
1. Insert shell (3)
cooler
onto oil cooler
adaptor
adaptor (4).
2. Tighten center stud
Torque to 50-
(2).
60 ft. lb.
(67.8-81.3 Nm).
g. Oil
Install pipe plug (1).
Start and run
filter
engine for a
short period
of time. Check
for oil leaks.
Stop engine for
10 minutes and
check oil level.
Add sufficient
oil to bring
level up to
full on the
dipstick.
3-2550
|
||
|
||
