| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-219-14-6
3-164.1. CYLINDER HEAD - MAINTENANCE INSTRUCTIONS (Continued).
LOCATION
ITEM
ACTION
REMARKS
REPAIR (Cont)
c. Press the
nozzles in
place with
the nozzle
openings
parallel to
the longitud-
inal center-
line. Press
the nozzles
flush to
.0312 inch
(.0792 cm)
recessed be-
low surface
of cylinder.
d. Check to make
sure the
nozzles fit
tight. Use
a wood plug
or other suit-
able tool to
expand the
nozzles, or
thin the out-
side diameter
with solder to
provide a
tight fit.
If solder is
used, make
sure orifices
in nozzles
are not closed
with solder.
3-2737
|
||
|
||
