| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-219-14-6
3-164.2. FUEL INJECTOR TUBE - MAINTENACE INSTRUCTIONS (Continued)
LOCATION
ITEM
ACTION
REMARKS
INSTALLATION (Cont.)
a. Hand
Ream the injector tube
for the injector nut and
spray tip. With the cylinder
head right side up and the
injector tube free from dirt,
proceed with the first reaming
operation as follows:
1. Place a few drops of
Use tool J5286-
light cutting oil on
1.
the reamer flutes.
Then carefully position
the reamer in the injector
tube.
2. Turn the reamer in a clock-
wise direction (withdrawing
the reamer frequently for re-
moval of chips), until the low-
er shoulder of the reamer con-
tacts the injector tube. Clean
out all of the chips.
3-2760
|
||
|
||
