| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-219-14-6
3-164.2. FUEL INJECTOR TUBE - MAINTENACE INSTRUCTIONS (Continued)
LOCATION
ITEM
ACTION
REMARKS
INSTALLATION (Cont.)
3. Proceed carefully with
the reaming operation,
withdrawing the reamer
occasionally to observe
the reaming progress.
Wear protective eye goggles when using compressed air.
4. Remove the chips from
injector tube, and using
the injector as a gage,
continue reaming until the
shoulder of the spray tip
is within the limits specified.
Then, wash the interior of
the injector tube with
trichlorethylene or clean
fuel oil and dry with
compressed air.
To sharpen any reamers, use lapping tools.
3-2764
|
||
|
||
