| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-219-14-6
3-165.1. VALVE AND INJECTOR MECHANISM - MAINTENANCE INSTRUCTIONS
(Continued).
LOCATION
ITEM
ACTION
REMARKS
REPAIR (Cont.)
c. Before installing the
new roller pin, remove
the preservative by
washing the parts with
clean lubricating oil or
Cindol 1705 and wipe dry.
Do not use fuel oil.
After washing the parts,
lubricate the roller and
pin with Cindol 1705.
d. Position the cam follower
body in the groove of the
fixture, with the small plunger
extending through the roller
pin hole in the lower leg of
the follower body.
e.
Position the new cam roller
in the cam follower body.
When released, the plunger
will extend into the roller
bushing and align the roller
with the cam follower body.
f.
Start the new pin in the cam
follower body. Carefully tap
it in until it is centered in the
cam follower body.
3-2780
|
||
|
||
