| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-219-14-6
3-167.1. FLYWHEEL - MAINTENANCE INSTRUCTIONS (Continued)
LOCATION
ITEM
ACTION
REMARKS
INSPECTION (Cont)
b. Although the flywheel
seldom requires re-
placement, the fly-
wheel ring gear may
become worn due to
normal usage or dam-
aged by improper use
of the starting motor
to the extent that
it must be replaced.
If replacement of
the ring gear is
necessary, refer to
Direct Support Mainte-
nance.
INSTALLATION
3.
a. Dowel
Check the extensions.
The dowels must
pins.
not extend more
(4)
than 1/2 inch
(1.27 cm) from
the crankshaft.
b. Flywheel
1. Attach flywheel
(3)
lifting tool
J6361-01 to the
flywheel with two
7/16 inch-14 bolts.
Then, using a chain
hoist, position the
flywheel in the fly-
wheel housing and
over the dowels in
the crankshaft.
NOTE
Since one bolt hole is offset, the flywheel can be installed in
only one position.
3-2870
|
||
|
||
