| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-219-14-6
3-167.2. FLYWHEEL HOUSING - MAINTENANCE INSTRUCTIONS (Continued).
LOCATION
ITEM
ACTION
REMARKS
INSTALLATION (Cont)
e.
If the run-out exceeds
the maximum limits,
remove the flywheel
housing and check for
dirt or foreign mater-
ial between the end
plate and flywheel
housing, and the new
gasket end plate and
flywheel housing, and
between the end plate
and the cylinder block.
f.
Reinstall the flywheel
housing and the fly-
wheel, and tighten the
attaching bolts in the
proper sequence and to
the specified torque.
Then recheck the run-
out. If necessary,
replace the flywheel
housing.
8.
Lifter
a.
Screws
Remove from flywheel
bracket
(17),
housing.
(3)
lock-
washers
(18),
and
bracket
(3)
b
Gasket
Remove.
Discard gasket.
(19)
c.
Gasket
Affix new gasket
(19)
to brackets
3-2886
|
||
|
||
