| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-219-14-6
3-168.2. OIL BY-PASS VALVE - MAINTENANCE INSTRUCTIONS.
a. To assure proper lubrication if the oil cooler core becomes clogged, a valve, located between the oil
inlet and the core, by-passes the oil around the cooler directly to the oil gallery in the cylinder block.
b. The by-pass valve should be removed, cleaned and reassembled whenever the cooler core is cleaned
or replaced. However, if required, the by-pass valve can be removed without removing the oil cooler.
This task covers:
a.
Removal
b.
Inspection
c.
Installation
INITIAL SETUP
Test Equipment
References
None
None
Equipment
Special Tools
Condition
Condition Description
Paragraph
None
Oil Pan Removal
Material/Parts
Special Environmental Conditions
Gasket Kit P/N 5194800
None
Personnel Required
General Safety Instructions
1
Observe WARNING in procedure.
3-2895
|
||
|
||
