| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-219-14-7
3-171.2. CONNECTING ROD - MAINTENANCE INSTRUCTIONS (Continued).
LOCATION
ITEM
ACTION
REMARKS
ASSEMBLY (Cont)
d.
Connecting
Place the upper end of
rod
the connecting rod be-
(3)
tween the piston pin
bosses and in line with
the piston pin holes.
e.
Piston
Slide the piston pin into
pin
place. If the piston
(10)
pin-to-bushing clearances
are within the specified
limits, the pin will slip
into place without the
use of force.
f.
Piston
1. Place on piston;
Use tool
pin
then place crowned
J1513-4.
retainer
end of installer
(13)
against the retainer.
2. Place handle on
installer.
3. Strike the handle just
hard enough to deflect
the retainer and seat
it evenly in the piston.
Do not drive the retainer in too far or the piston bushing
may be moved inward and result in reduced piston pin
end clearance.
g.
Piston
After the piston pin re-
pin
tainers have been in-
(10),
stalled, check for piston
and
pin end clearance by
connecting
cocking the connecting
rod
rod and shifting the pin
(3)
in its bushings.
assembled
3-2950
|
||
|
||
