| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-219-14-7
3-171.3.
CONNECTING ROD BEARINGS-MAINTENANCE INSTRUCTIONS
(Continued).
LOCATION
ITEM
ACTION
REMARKS
ASSEMBLY (Cont)
b.
Oil
Remove.
Refer to para-
inlet
graph 3-170.
pipe
c.
Lube
Remove.
Refer to para-
oil
graph 3-169.
pump
2.
Connecting
rod(s)
NOTE
The connecting rod bearing caps are numbered 1L, 1R,
2L, 2R, etc., with matching numbers and letters stamped
on the connecting rods. When removed, each bearing
cap and the bearing shells must always be reinstalled on
the original connecting rod.
a.
Nuts
Remove.
(1)
b.
Bearing
Remove.
cap
(2)
c.
Connecting
Push connecting rod
Push far enough
rod
and piston assembly
to permit
(3)
up into the cylinder
access to upper
liner.
bearing shell.
d.
Upper
Remove from connecting
Do not pound on
bearing
rod.
edge of bearing
shell
shell with
(4)
sharp tool.
e.
Lower
Remove from bearing
Do not pound on
bearing
cap (2).
edge of bearing
shell
shell with
(5)
sharp tool.
3-2956
|
||
|
||
