| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-219-14-7
3-178. HYDROSTARTER PUMP (ENGINE-DRIVEN) - MAINTENANCE INSTRUCTIONS-
(Continued).
LOCATION
ITEM
ACTION
REMARKS
REMOVAL (Cont)
10.
Charging
a. Remove five capscrews
pump
(7) and lockwashers (8).
b. Remove charging pump
(9) from flywheel
housing.
c. Remove gasket (10).
INSTALLATION
11.
Engine
a. Charging
a. Install gasket (10)
Use a new
driven
pump
and charging pump
gasket. Use
pump
(9).
Permatex #2
sealant on the
flywheel side
only.
b. Align the tangs on
pump drive with slots
in the drive plate.
CAUTION
Do not force the pump into place. Use of force or,
tightening the bolts when the mounting flange is not
against the flywheel housing, will force the drive arm
against the pump body and result in damage to the
pump when the engine is started.
c. Install five lock-
washers (8), and
capscrews (7).
3-- 3056
|
||
|
||
