| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-21Y-14-7
3 - 210.
STEERING SYSTEM - HYDRAULIC CYLINDER AND LINKAGE -
MAINTENANCE INSTRUCTIONS (Continued).
LOCATION
ITEM
ACTION
REMARKS
ADJUSTMENT
17. Adjust-
a.
Hydraulic
1. Remove cotter pin,
able
cylinders
slotted hex nut and
rods,
washer attaching cyl-
threaded
inder to rudder post.
rods,
and
2. Manually move rudder
hydraulic
until it is aligned
cylinders
parallel to the fore
and aft line.
3. Loosen setscrew and
adjust position of
rod end eye.
4. Reinstall rod end eye
and all hardware.
b.
Adjust-
1. Remove cotter pins,
able
slotted hex nuts and
rod
washer attaching rod
to
rudder post.
2. Manually move rudder
until it is aligned
parallel to the fore
and aft line.
3. Loosen locknuts and
rotate rod end eye.
4. Reinstall rod end
eye and all hardware.
NOTE
Make sure that all rudders are parallel to fore and aft line.
c.
Threaded
1. Remove screws and
rod
flatwashers.
3-3258
|
||
|
||
