| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-219-14-7
3-223. REACTIVATION FROM STORAGE.
To remove a component from storage, perform the following:
A.
Engine.
1. Remove the valve rocker covers and pour one gallon of engine oil over the rocker arms and push rods.
2. Re-install valve rocker covers.
3. Remove all covers from openings. Do not forget the exhaust outlet.
4. Wash the exterior with fuel oil and dry with compressed air.
5. Tighten belts to bilge pump.
6. Check crankcase oil level.
7. Drain all anti-freeze from cooling system. Refill and add a rust inhibitor.
8. Service the air cleaner.
B. Marine Gear.
Check the marine gear and refill if necessary.
C. Torquematic Converter.
1. Remove covers from all openings.
2. Wash the exterior with fuel oil and dry with compressed air.
3. Start the engine and operate the unit until the temperature reaches 150 (66'C).
F
a. Drain the preservative oil.
b. Change the filter.
c. Start the engine and stall the converter for twenty seconds at 1000 RPM to scavenge the oil from the
converter.
CAUTION
The torquematic converter containing preservative oil should only be operated enough to
bring the oil temperature to 150 (66 ).
F
C
d. Install a new filter and drain plug.
3-3357
|
||
|
||
