| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-219-14-8
4-7.2.
CARBURETOR-MAINTENANCE INSTRUCTIONS (Continued).
LOCATION
ITEM
ACTION
REMARKS
ADJUSTMENTS
2. Carefully close both needles
against their respective seats.
3. Open the low speed needle
approximately one turn, and
the high speed needle about
three-quarter turn.
4. Replace both dials in their
respective positions with a
point between numerals four
and five directly above the
centerline of the needle in
each case. This will allow
maximum adjustment on each
side of the normal setting of
each needle by the use of the
adjusting dials. Secure dials
to needles with their connecting
screws, making sure the needles
are not moved from their adjusted
position in the process.
4-123
|
||
|
||
