| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-220-14-10
SECTION I REPAIR PARTS, SPECIAL TOOLS, TMDE, AND SUPPORT EQUIPMENT
5-1. GENERAL.
Repair parts, special tools, test, maintenance, diagnostic equipment, (TMDE), and support equipment are
listed and illustrated in TM 55-1905-220-34P. All fabricated tools are listed in Appendix H.
SECTION II TROUBLESHOOTING
5-2. GENERAL TROUBLESHOOTING.
a. This table lists the common malfunctions which you may find during the operation and maintenance of
the landing craft.
b. You should perform the tests/inspections and corrective actions in the order listed.
c. This manual cannot list all malfunctions that may occur, nor all tests or inspections and corrective
actions. If a malfunction is not listed or is not corrected by listed corrective actions, notify your supervisor.
d. Refer to Chapter 3 or 4 for the crew and organizational maintenance procedures.
Table 5-1. Fuel system - Injector - Incorrect Fuel Output Troubleshooting.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
1. Incorrect fuel output.
Step 1.
Spray tip or orifices partially plugged.
Clean the orifices with tool J4298-1 using the proper size wire.
Step 2.
Spray tip orifices enlarged.
Replace the spray tip.
Step 3.
Carbon build-up in tip.
Ream the injector tip with tool J1243.
5-2
|
||
|
||
