| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-220-14-10
5-5. MARINE GEAR - MAINTENANCE INSTRUCTIONS (Continued).
LOCATION
ITEM
ACTION
REMARKS
OVERHAUL - REASSEMBLY (Cont)
Sintered-Metal Clutch Plates
The possibility of clutch pack failure exists on initial start-up
after rebuild, due to lack of. lubrication until lube pressure builds
up.
All sintered-metal clutch plates must be submerged in oil (use
same oil as will be used in unit) for a minimum of one (1) hour
prior to assembly. A longer soaking period would be even more
beneficial.
Covering the plates with oil from an oil can during assembly is
NOT sufficient!
j.
Eight
Install.
Alternate clutch
sintered-
plate stack.
metal
Begin and end
clutch
with a sintered-
plate-s
metal clutch
(161), and
plate.
seven
steel
clutch
plates
(162)
k. Split
Install twelve on
sleeves
clutch spider (152)
(160)
and studs (169).
l.
Release
Install.
springs
(159)
m. Piston
Install new rings.
Rings are 1-3/4
rings
inch .
(158)
5-108
|
||
|
||
