| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-220-14-10
5-5. MARINE GEAR MAINTENANCE INSTRUCTIONS (Continued).
LOCATION
ITEM
ACTION
REMARKS
OVERHAUL IN CRAFT(Cont)
2. Place the clutch cylinder (149) with piston, in
position against the clutch spider (152). Use
three 3/8-16 NC X 1 fully-threaded machine
screws to hold the cylinder to the spider
against the tension of the springs. Install six
lock plates (147) and twelve 3/8-24 hex nuts
(148) on the studs on the clutch spider.
The
center of each lock plate must cover a roll pin.
Tighten the hex nuts to 38 lb-ft (51.5 Nm)
torque, and lock in place by bending the lock
plates (147). Remove the three hold-down
machine screws.
5-157
|
||
|
||
