| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-220-14-10
5-7. VARIABLE SPEED MECHANICAL GOVERNOR - MAINTENANCE INSTRUCTIONS (Continued).
LOCATION
ITEM
ACTION
REMARKS
OVERHAUL - REASSEMBLY (Cont)
b. Governor
1. Place the governor
weight
weight, either end up,
(64) and
on the bed of an arbor
press.
(65)
2. Lubricate the outer
surface of the bearing
with engine oil and
start the bearing
numbered end up,
straight into the bore
of the weight.
3. Insert the pilot end
of installer in the
bearing and under the
ram of the press.
4. Press the bearing
straight in the weight
until it is flush with
the top of the weight.
5. Reverse the weight on
the press and install
the second bearing in
the same manner.
5-204
|
||
|
||
