| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-220-14-10
5-8. BLOWER-MAINTENANCE INSTRUCTIONS (Continued).
LOCATION
ITEM
ACTION
REMARKS
OVERHAUL-ASSEMBLY (Cont)
2. Start the oil seal
straight into the bore
in the end plate with
the sealing edge facing
down (toward the
bearing bore).
3. Place the short end
of all oil seal remover
and installer J6270-3
in the oil seal and
under the ram of the
press. Then, press
the oil seal into the
end plate until the
shoulder on the in-
staller contacts the
end plate.
5-237
|
||
|
||
