| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-220-14-10
5-8. BLOWER-MAINTENANCE INSTRUCTIONS (Continued).
LOCATION
ITEM
ACTION
REMARKS
OVERHAUL-ASSEMBLY (Cont)
3. Place the alignment
clamp adaptor J21834-1,
in the coupling cam.
Then, install the align-
ment clamp J21834-2 and
tighten it only enough
to prevent any misalign-
ment during the assembly
of the coupling to the
gear.
CAUTION
Insert a rag between the rotor gears to keep them from turning.
4. Tighten two bolts that are
opposite to one another to
20-25 lb-ft (27.1-33.9
Nm) torque and then remove
the alignment clamp and
tighten the remaining bolts
to the same torque. The
cam spline runout should not
exceed 020" total indicator
reading.
5-258
|
||
|
||
