| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-220-14-10
5-19.2. IDLER GEAR - MAINTENANCE INSTRUCTIONS (Continued).
LOCATION
ITEM
ACTION
REMARKS
REASSEMBLY (Cont)
f.
Inner
Install the inner spacer
spacer
ring on the idler gear
ring (14),
hub so that the oil hole
and idler
in the hub is 180from
hub (7)
the gap in the inner
spacer ring.
g. Idler gear
Position the gear with
(9)
both cups over the hub
and inner bearing cone.
CAUTION
The bearing cones must be supported so as not to load the
bearing rollers during this operation.
h. Outer
Press the bearing cone
bearing
over the hub, while
cone (15)
rotating the gear to
seat the rollers properly
between the cones.
5-349
|
||
|
||
