| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-220-14-10
5-33. ENGINE ASSEMBLY-REMOVAL AND RUN-IN-MAINTENANCE INSTRUCTIONS.
LOCATION
ITEM
ACTION
REMARKS
ENGINE RUN-IN INSTRUCTIONS (Cont)|
(3)
(a)
Certain instrumentation is necessary so that data required to
complete the Engine Test Report may be obtained. The
following-list contains both the minimum amount of instruments
and the proper location of the fittings on the engine so that the
readings represent a true evaluation of engine conditions.
1.
Oil pressure gage installed in one of the engine main oil
galleries.
2.
Oil temperature gage installed in the oil pan, or thermometer
installed in the dipstick hole the oil pan.
3.
Adaptor for connecting a pressure gage or mercury manometer
to the engine air box.
4.
Water temperature gage installed in the water outlet manifold.
5.
Adaptor for connecting a pressure gage or water manometer to
the crankcase.
6.
Adaptor for connecting a pressure gage or mercury manometer
to the exhaust manifold at the flange.
7.
Adaptor for connecting a vacuum gage or water manometer
to
the blower inlet.
8.
Adaptor for connecting a fuel pressure gage to the fuel manifold
inlet passage.
5-529
|
||
|
||
