| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-220-14-10
5-42. LUBE OIL PUMP-MAINTENANCE INSTRUCTIONS (Cont).
LOCATION
ITEM
ACTION
REMARKS
REASSEMBLY
3.
a. Bushings
Press into body (6).
Use new bushing,
(35)
if removed pre-
viously.
b. Drive gear
1. Insert key in shaft.
Use new gear
(30), shaft
and shaft, if
(29), and
removed pre-
woodruff
viously.
key (34)
2. Apply a light coat
of engine oil to
the shaft.
3. Start the shaft
Use an arbor
squarely into the
press.
bore of the gear.
4. Press shaft into
gear.
5. The gear must be
6-15/16 inches
from the keyway
end of the shaft.
c. Dowel pin
Install.
(33)
d. Idler gear
Install.
support
(32), and
screw (31)
e. Drive gear
Install in body.
(30), and
shaft (29)
assembly
5-620
|
||
|
||
