| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-220-14-10
5-42. LUBE OIL PUMP - MAINTENANCE INSTRUCTIONS (Cont).
LOCATION
ITEM
ACTION
REMARKS
REASSEMBLY (Cont).
f.
Shaft (29),
1. Position gear no
Use new shaft
woodruff
the end of the shaft
and gear, if
key (28),
with the extended
previously re-
and drive-
hub side up away
placed.
driven
from the body.
gear (27)
2. Insert a .005 feeler
ribbon between the
gear and the body.
3. Press the gear on
the shaft until the
clearance is .005
between the body and
the gear.
g. Bushings
Install.
Use a new bush-
(26)
ing.
h. Idler gear
1. Lubricate with
Use a new gear,
(24)
engine oil.
if replaced
2. Install with flat
side facing the
support (32).
i.
Idler gear
1. Rotate washer and
washer
lockwasher so that
(23),
the slot in each
lockwasher
washer engages the
(22), and
headless pin.
screw (21)
2. Install.
j.
Bushings
Install.
Use new bushing
(20), and
and shaft, if
shaft (19)
necessary.
k. Driven gear
Install.
Use a new gear,
(18)
if replaced.
l.
Bushing
Install.
Use a new bush-
(17)
ing.
5-622
|
||
|
||
