| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-220-14-10
5-64. SLACK PULLER AND MOTOR - ANCHOR WINCH - MAINTENANCE
INSTRUCTIONS (Continued).
LOCATION
ITEM
ACTION
REMARKS
REPAIR (Cont)
WARNING
The vanes are held against the cam ring by tension from the springs in the rotor. If
the rotor is pulled from the cam ring with no protection, compression from the
springs will cause the vanes to be thrown forcibly out from the rotor in all
directions. Serious injury can occur to the maintenance personnel since the vanes
have fine, sharp edges.
Place the cartridege (cam ring, rotor, springs, and vanes) on a clean, flat surface.
Push the rotor and vanes simultaneously out of the cam ring far enough so that a
ring compressor can be securely fastened around the vanes. Once the ring
compressor is in place, push the rotor and vanes the remainder of the way out of
the cam ring. Ease the tension of the ring compressor slowly so that the vanes do
not fly out of the rotor.
5-795
|
||
|
||
