| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-220-14-10
5-65.2. DISCONNECT CLUTCH ASSEMBLY - ANCHOR WINCH - MAINTENANCE INSTRUCTIONS
(Continued)
LOCATION
ITEM
ACTION
REMARKS
DISASSEMBLY (Cont)
f.
Pressure
1. Place on the table
plate
of the arbor or
assembly
drill press.
(7)
2. Place block across
the spring retainer
and hold the springs
in a compressed posi-
tion so that the two
hold-down screws can
be removed and then
slowly release the
spring tension.
g. Cotter pins
Remove.
(8)
h. Link pins
Remove.
(9)
i.
Needle
Drive out.
Use an arbor
press.
(5)
j.
Pressure
Drive out with pin
plate lock-
punch or other suitable
pins (10)
tool.
k. Link pin
Remove.
(11)
l.
Release
Separate.
lever link
(12), and
release
lever (13)
m. Nut (14),
Remove.
If necessary.
and adjust-
ing screw
(15)
n. Lever guide
Remove.
If necessary.
(16)
5-830
|
||
|
||
